14 sizes in stock, 400–1600 mm and 20–100 W. Stable optical power and batch-level traceability for cutting, engraving, embroidery, medical and desktop machines.
The rear mirror, the discharge capillary, the water jacket and the output window together set beam quality and how slowly power fades.
The high-reflectance mirror at one end of the resonator; it sets how efficiently photons survive each pass.
The mixed working gas discharges here.
The outer glass jacket, run with a chiller, holds working temperature and power stability.
Transmission and coating quality directly determine output power and beam mode.
| Model | Length | Ø | Rated power |
|---|---|---|---|
| 450–50–20W | 450 mm | 50 mm | 20 W |
| 600–50–30W | 600 mm | 50 mm | 30 W |
| 700–50–40W | 700 mm | 50 mm | 40 W |
| 700–80–40W | 700 mm | 80 mm | 40 W |
| 800–50–50W | 800 mm | 50 mm | 50 W |
| 800–80–60W | 800 mm | 80 mm | 60 W |
| 850–55–50W | 850 mm | 55 mm | 50 W |
| 900–50–60W | 900 mm | 50 mm | 60 W |
| 950–80–60W | 950 mm | 80 mm | 60 W |
| 1000–50–60W | 1000 mm | 50 mm | 60 W |
| 1200–55–60W | 1200 mm | 55 mm | 60 W |
| 1250–80–80W | 1250 mm | 80 mm | 80 W |
| 1450–80–100W | 1450 mm | 80 mm | 100 W |
| 1600–60–100W | 1600 mm | 60 mm | 100 W |
14 sizes in stock. Other length, diameter and power combinations are available on request, including builds matched to your machine's optical path.
Request the full datasheet →Every tube is tested and traceable on its own. Four process steps behind four results: power-supply compatibility, fast response, clean beam profile and slow degradation.
Glass bore cleaning; every incoming part is checked before assembly.
Resonator calibration and physical gold-plating of the core ensure beam profile and output power.
Tube degassing and gas filling: working gas is filled in proportion, then the tube is sealed off.
Lasing test, power calibration and cosmetic check on every tube; the record is filed before packing.
The tube is the core consumable and the light source of a laser machine. Builders choose the tube by machine model; end users replace it by the original tube size.
Founded in 2015, we sell and support electromechanical equipment. We are the exclusive strategic distributor of CO₂ sealed-off laser tubes from Beijing Aipulong Laser Technology Co., Ltd., handling domestic and overseas sales, after-sales service and technical support.
ZJYL runs a complete key-account sales and service system — one dedicated contact per customer, quality issues tracked through to resolution, and full cooperation even when a problem is not ours. Years of key-account service have earned us a solid reputation in electromechanical distribution and after-sales.
Aipulong was founded in 2000 and has spent more than two decades on CO₂ sealed-off laser tubes alone, with an annual capacity of 30,000 tubes supplying laser equipment makers in China and abroad.
ZJYL handles promotion, sales and after-sales follow-up for that product, giving machine builders and end users a stable supply and help with selection.
Held by the manufacturer, Beijing Aipulong Laser Technology Co., Ltd., and covering the sizes listed on this site. Numbers and validity below.
